– Geometrie für Werkstoffe normal bis weich – Typ N-W
– Zähne 2
– Spitzenwinkel 120°
– Stufenwinkel 60°
– Schaftform HA
– Ausführung nach Werksnorm
– Beschichtung blank
– Werkstoff Universal
– High Performance
– Bearbeitungsrichtung z
– Bohrung mit Fase
| Bohrertyp | Zentrierbohrer |
|---|---|
| Produktlinie | RIWMILL |
| Schneidstoff | HM |
| Schneidenanzahl (z) | 2 |
| Schaftform | HA |
| Marke | Riwag |
| Spitzenwinkel | 120° |
| Beschichtet | Ja |
Variante über untenstehende Tabelle auswählen, um weitere Infos anzuzeigen.
| d1 | l1 | d2 | l2 | Abmessung | Artikelnummer | Preis |
|---|---|---|---|---|---|---|
| 0.50 mm | 31.50 mm | 3.15 mm | 5.50 mm | D=0,5/3,15x5,5/31,5mm | EK60805009 | CHF 28.15 |
| 0.80 mm | 31.50 mm | 3.15 mm | 5.50 mm | D=0,8/3,15x5,5/31,5mm | EK60808009 | CHF 28.15 |
| 1.00 mm | 31.50 mm | 3.15 mm | 6.00 mm | D=1/3,15x6/31,5mm | EK60810009 | CHF 28.15 |
| 1.25 mm | 31.50 mm | 3.15 mm | 6.00 mm | D=1,25/3,15x6/31,5mm | EK60812509 | CHF 28.15 |
| 1.60 mm | 35.50 mm | 4.00 mm | 7.50 mm | D=1,6/4x7,5/35,5mm | EK60816009 | CHF 30.05 |
| 2.00 mm | 40.00 mm | 5.00 mm | 9.50 mm | D=2/5x9,5/40mm | EK60820009 | CHF 34.05 |
| 2.50 mm | 45.00 mm | 6.30 mm | 12.00 mm | D=2,5/6,3x12/45mm | EK60825009 | CHF 40.65 |
| 3.15 mm | 50.00 mm | 8.00 mm | 15.00 mm | D=3,15/8x15/50mm | EK60831509 | CHF 46.00 |
| 4.00 mm | 56.00 mm | 10.00 mm | 19.00 mm | D=4/10x19/56mm | EK60840009 | CHF 55.40 |
| 5.00 mm | 63.00 mm | 12.50 mm | 23.50 mm | D=5/12,5x23,5/63mm | EK60850009 | CHF 81.70 |
| 6.30 mm | 71.00 mm | 16.00 mm | 30.00 mm | D=6,3/16x30/71mm | EK60863009 | CHF 115.50 |
| P | P1 | P2 | P3 | P4 | P5 | P6 |
| M | M1 | M2 | M3 |
| K | K1 | K2 | K3 | K4 |
| N | N1 | N2 | N3 | N4 |
| S | S1 | S2 | S3 | S4 | S5 |
| H | H1 | H2 | H3 |
